aRCMLoader payload injector for your Switch console. Most Switch consoles made before June 2018 are compatible with our RCMLoader.
If you still need to make sure before you buy from us then please check here.
Made for payload.bin injection file in to the Nintendo Switch console. All our RCMLoaders Payload Injectors have the latest firmware (1.2) installed before being posted to you. We like to make the process a smooth as possible for you.
Built-in Atmosphere, ReiNX and SX OS payload files, and only one-button to change the payload being injected.
For your convenience we have loaded the latest packages onto the included SD Card.
It features a built-in Li-on battery – 1000 payload injection from just 1 hour of charging time.
Very easy to manage as well, just connect to a computer or mobile phone and it is automatically recognized as a USB flash drive.
You can then follow the instructions below to drag-and-drop the required .bin file to the root of the SD card.
Fully compatible with Windows 7 and newer, macOS, Linux and Android operating systems.
RCMLoader payload injector Guidence:
1 – Download and extract SD files to your Switch’ microSD card.
exFAT is recommended for files larger than 3.7GB, a requirement for a large number of games to work seemlessly.
2 – Insert RCMloader and RCMclip into your Nintendo Switch.
The RCMloader goes in to your Nintendo Switch USB-C charger port, the RCMclip (also known as the jig) goes in to the right Joycon rail.
3 – Hold volume-up and press the power button, CFW should start.
You can remove the RCMloader and RCMclip once your CFW (Custom Firmware ) starts.
4 – Enjoy!
How to show current payload:
A comprehensive guide can be found by clicking here or by following the instructions below.
Click the button + to show the current payload (LED flash twice).
How to change build-in payload: Hold the button + to jump to the next payload (LED flash 4 times).
Low battery prompt: When your battery is low, the LED light will flash red and green when the + (plus) button is pressed.
Replace/update the payload steps:
1 – Connect RCMloader to the computer by MicroUSB cable.
2 – After the computer automatically recognizes the RCMloader as a USB flash disk, copy the payload.bin file to the corresponding folder to replace the payload.
NOTE: The Payload file MUST be named payload.bin
Click the link https://www.youtube.com/watch?v=1B556ZJlrUk to see a video demonstration of the RCM payload injector being setup and used